Official Luthiers Forum! http://www-.luthiersforum.com/forum/
Paul Woolson - Clamps http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5180	Page 1 of 1

---

Author:	Dave-SKG [ Sun Feb 19, 2006 10:15 am ]
Post subject:
Hi Paul, got the clamps...beautiful clamps THANKS! I especially like the different wood used for the levers...what is that by the way? Anyway, thanks for the great clamps.

---

Author:	Pwoolson [ Sun Feb 19, 2006 12:28 pm ]
Post subject:
Thanks Dave. That is Lyptus. It's some sort of hybrid of Euclyptus and someting harder and more stable. Not all of the clamps got contrasting cams. But I thought it would be nice for your set to be "complete" with all the same woods. I'm still experimenting with what I like best and what works best.

---

Author:	BlueSpirit [ Sun Feb 19, 2006 7:45 pm ]
Post subject:
Hey Paul, I got mine yesterday, and they are the best clamps I own now. Beautiful job. Also got the plans for the neck tenon jig. Great job, my friend.

---

Author:	Dave-SKG [ Mon Feb 20, 2006 1:53 am ]
Post subject:
Paul, I really appreciated that "elyptus" cam. I have to take special care of my special clamps. THANKS AGAIN!

---

Author:	Pwoolson [ Mon Feb 20, 2006 4:30 am ]
Post subject:
Ah, the vintage look. Yes, I was going for the pre-war martin look on the clamps. Truth be told, I had a LOT of them to finish and mixing up a couple of quarts of shellac was much cheaper than anything from the store. So that's what I used. And if you ever want to hit them with something else, it will stick to the shellac.

---

Author:	Robbie O'Brien [ Mon Feb 20, 2006 8:00 am ]
Post subject:
Just got my clamps from the UPS guy. Very nice job Paul, Thanks! I am going to the shop to put them to work right now!

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/